Call: 603-893-1894
Fax: 603-898-9025

[sales@itctapes.com]

Transfer Tapes - Permanent Unsupported - Edge to Edge


laminations	splicing paper	ATG tape dispensers

Permanent Unsupported - Edge to Edge Transfer Tape Phys. Characteristics*

ITC # Description/Application TT LT PA EL TS RL

4570 1 mil Clear Permanent Acrylic Adhesive cast on a 3.5 mil siliconized paper release liner. The adhesive offers good temperature and UV resistance for interior and exterior applications. This transfer tape offers resistance to plasticizer and high heat. This transfer tape is used for laminating and mounting in plastic to plastic and metal to metal applications. 1.0 3.5 70 N/A N/A P

4575 2 mil Acrylic Adhesive cast on a 3 mil brown polycoated kraft release liner. The adhesive is designed to instantly transfer to most smooth or slightly irregular surfaces after applying pressure. Good initial adhesion and quick stick. This transfer tape exhibits very good high temperature performance, excellent shear adhesion; resistant to aging, sunlight, oxidation and weathering. This transfer tape is used for overlap or fly splicing of paper, film, foils and textiles; laminating & bonding nameplates. (Also available reverse wound on 1" ID core for use in ATG applicators, ITC#4456). 2.0 3.0 60 N/A N/A P

4802 2 mil Acrylic Adhesive cast on a 4.5 mil brown polycoated kraft release liner. Initial adhesion and quick stick is extremely high. This transfer tape exhibits very good low and high temperature performance, excellent shear adhesion; resistant to aging, sunlight, oxidation and weathering. Typical applications are fly splicing for paper, films and foil. This transfer tape is an excellent choice for bonding irregular surfaces such as foams, fabrics and embossed plastics. General purpose mounting tasks. 2.0 4.5 50 N/A N/A P

4940 4 mil Acrylic Adhesive cast on a 3.5 mil brown polycoated kraft release liner. This transfer tape exhibits exceptional high tack and quick stick. This transfer tape is designed to perform well over a wide temperature range. Adhesive laminates well to a variety of substrates, including untreated polyolefin. Used for mounting nameplates, decorative trim, gap filling, foam gasketing and difficult bonding, mounting and splicing applications. 4.0 3.5 104 N/A N/A P

4499 5 mil Acrylic Adhesive cast on a 4.5 mil brown polycoated kraft release liner. The adhesive is designed to instantly transfer to most smooth or slightly irregular surfaces after applying pressure. This transfer tapes heavy mass of adhesive allows for excellent bond to a variety of irregular surfaces such as open cell foam, woven fabrics and embossed vinyls. This transfer tape is exceptional for use in laminating, mounting and splicing of difficult substrates. (Also available reverse wound on 1" ID core for use in ATG applicators, ITC#4498). 5.0 4.5 120 N/A N/A P

4805 5 mil Acrylic Adhesive cast on a 4.5 mil brown polycoated kraft release liner. This transfer tapes heavy mass of aggressive adhesive and good shear strength allows for excellent bonding for laminating adhesive to foams, fabrics, metal or plastic nameplates. This transfer tape is also used for splicing of films, fabrics and foils. Well suited for joining materials with irregular or textured surfaces. 5.0 4.5 100 N/A N/A P

* (P) Paper Rlease Liner (F) Film Release Liner (X) Extended Liner-1/8" beyond adhesive
(I) Adhesive wound in

   (TT/LT) Tape/Liner Thickness (mils) (PA) Peel Adh. (oz/in width) PSTC-3
   (EL) Elongation % (TS) Tensile Strength (lb/in width)

   (RL) Release Liner Config. (P) Paper Release Liner (F) Film Release Liner
   (X) Extended Liner-1/8" beyond adh. (I) Adhesive wound in

This information is offered as a guide in proper selection. The user must determine the suitability of the product for the intended use. International Tape Company reserves the right to change product specifications or delete products without notice. Because of the varied applications and performance conditions, our products are warranted against manufacturing defects only.

More Transfer Tapes:
Permanent Unsupported - Extended Liner
Permanent Supported - Extended Liner
Removable & ATG Type Transfer Tape

Copyrights © 2005 - 2008 International Tape Company. All Rights Reserved.
Custom New Hampshire Website Design and Development

high tack tape, super permanent double coated tape, tape manufacturer, double coated polyester tape, polyethylene tape
polypropylene tape, high tack adhesive tape, permanent double coated tape, single coated vinyl tape, tissue tape
custome tape, double coated vinyl tape, low tack tape, high tack tape, bag sealing tape, acrylic tape, polyester tape
binyl tape, foam tape, cloth tape, transfer tapes, adhesive tape, paper ape, pressure sensative tape, tape converters